Super Comby - Complete Hay, Silage & Grain Feeder
Versatility
The Robertson Super Comby is a very versatile machine, being able to feed all types and sizes of round and square bales including straw, hay and baled silage. All of these are able to be loaded with the self loading forks and conveyed into place with the hydraulic driven floor conveyor. The Robertson Super Comby also feeds fine chopped silage, with a level load capacity of 9.6m3 or 12.0m3 using the optional slip on extension bin.
Operational Features
The Robertson Super Comby has a simple easy joy stick control feeding system. The elevator feeding system is controlled from the tractor hydraulics which can be stopped and started. The flow of oil passes through the elevator and goes to a joy stick controlled valve system giving forward and reverse of the feeding chamber and forward and reverse of the floor conveyer which brings feed material into the feed chamber. The rear self loading forks are controlled by the second double acting control in the tractor. The controls on the Super Comby give full control of feed material, being able to forward and reverse all floor movements. The elevator delivers feed out of the side of the machine and can be varied from light for sheep and deer to the
heavier row for feeding cattle.
| Standard machine with fine mesh silage door |
Tandem Axle
Fully oscillating heavy duty axle with greasable cast pivots |
| |
|
Optional Extras
|
|
|
Comby Spread
The ideal unit for spreading Causmag and/or Minerals
|
Tyre Options
11.5 / 80 x 15.3 AW Tread
12.5 / 80 x 15.3 AW Tread
400 / 60 x 15.5 AW Tread
400 / 60 x 15.5 Grip Tread
|
| |
|
 |
Self Loading Forks
For self loading round and square bales and extra bale
capacity.
|
Silage Extension Bin
Slips on to forks for extra silage capacity. (Turns machine
into 12m3 silage feed wagon).
|
| |
|
 |
Load Cell Waiting
For accurate weighing of silage and bales.
|
Silage Door
Hinged fine mesh door for silage. Stores on side of
machine.
|
| |
|
 |
Tilting Elevator
An advantage for trough feeding, feeding round bales and
putting feed along fence lines etc.
|
Electric Joystick Control
An option to standard cable joystick, gives finger tip
control to the cross floor and main floor movement.
|
| |
|
 |
Diverter Valve
Saves on one pair of hoses when using forks & tilting
elevator.
|
Clip on Grain, Nut & Meal
Variable speed hydraulic grain, nut and meal system.
Mounts on side of machine.
|
| |
|
Super Comby Load Dividing
BENEFITS OF LOAD DIVIDING
- Less pressure on drives
- Less wear and tear
- Faster loading
- Ability to calibrate load from tractor seat
- Total machine capacityThe Super Comby has a built in bale manipulator for accurate and maximum loading.
The Super Comby has a built in bale manipulator for accurate and maximum loading.
CAPACITY
- 4-5 Round Bales
- 5-11 Square Bales
- 9.6m3 Fine Chop Silage (level load)
- 12.0m3 Fine Chop Silage (capacity using bin extension)
- 6m3 Grain loading
SUPER COMBY SPECIFICATIONS
Overall width: 2750mm
Overall length: 5970mm
Overall length [with forks]: 8370mm
Overall height: 1780mm
Overall height [forks up]: 3500mm
Tare weight basic machine: 2300kg
Tare weight with forks and bin: 2810kg
Tare weight grain system only: 200kg
Standard Tyres: 11.5 / 80 x 15.3
Tandem axle: 4 tonne per pair
Joystick: Manual Cable / Optional Electric
Hydraulics required for standard: 1 pair double acting
Hydraulics required with fork / bin: Additional 1 pair double acting
Hydraulics required with tilting elevator: Additional 1 pair double acting 3 pair can be reduced for 2 pair with diverter valve
|
